Here’s Chimecho!
My Notes: I had no idea what to do for the bell at first, but I decided it would be best to make it darker. It was a fun sprite recolor ribby2000!
It looks awesome!
Thank you :D
Yep, this is what I came up with. Hope you like it.
If you want it for your avatar, try this: 
My Comments: This was a fun sprite to do. At first, I kept Rayquaza’s neck, which didn’t turn out so well (picture in spoiler below). So I decided to remove the neck, which worked well. Great request Elementking990!
[details]
[/details][/quote]
Thank you it looks very good and I will use it as my avatar :D
A very impressive splicing Thanks
I chose these two as they are my favourite pokemon and i wanted to see what they would look like spliced 
[spoilerSprites:3m44dp72]
[/details]
That took too long… Anyways, here are your sprites Willi! Hope you enjoy!
My Notes: The Red Skarmory sprite was quite fun since you said, “add red for the body(not the neck,legs,tail or wings)”. So I thought of how to do it, and it finally came to me. So there that.
Rhyperior’s Sprite was a little confusing since it didn’t fit on Aggron’s body. I did lazy and just placed it on though. Though I have to say that he is quite handy.
Oh my gosh… Magmortar’s sprite took way too long. I was thinking of how to place parts and finally gave in to just putting it on without edits… But that was a terrible mistake! It ended up having the longest edit time (3 hours and 48 minutes :x.x: ) of all my sprites! Just for that, I will put my face into the palm of my hand.
Electivire was a lot more convenient. I could put on the pieces and have a very minimal edit time. But now I have to admit: he looks fat.
But all in all, great request Willi! I got to learn a lesson from that, so I’m glad.[/quote]
Thanks and you welcome~ Now if you don’t mind, I’ll add a request or two~
Pokemon: Regigigas, Regice, Regirock, Registeel
Color of Sprite: Registeel’s color’s (Silver) for the main body. Regice’s Crystals stay the same.
Description: Regigigas has the primary body, make sure to use some of the crystal’s from Regice
Sprite with Pokemon Used or Sprite Alone:Alone
Other Comments:I wonder how this will go~
Here is your sprite Willi! I hope you enjoy!
My Notes: Whenever I work on your sprites, I seem to be interrupted. My luck is strange with this one. Anyways, the sprite was quite fun. Had to draw some Regigigas parts since it was covered by his arms. Also, I felt like it was more fun to put in Regirock’s legs and Registeel’s arms since you never specified if they should be one way or the other. Also, you told me to use crystals of Regice. I decided to remove the grass patches from Regigigas and put the crystals there. I also put it on the shoulders since I felt it needed more. Overall, this was a fun sprite to do! Thanks for requesting Willi!
Im back and its time to be evil Heh heh :>:D:
Pokemon: Flygon
Color of Sprite: Black, grey, red
Description: A sort of Dark Flygon; whatever you think makes it look ‘Dark’
If you do as good a job as you did with Rayaork then i will be happy enough.
…Since I can’t remember if I requested anything because I’ve been busy…nice job Shadow, it’s nice to see good spriters out there that don’t hurt my eyes. (:/ It’s true.I shouldn’t be talking either xD)
Let’s do this! >:U
Pokemon:Arcanine, Mightyena, Absol, Luxray, Ninetails, Shedinja
Color of Sprite:Holy Colors (White,Gold, etc)
Description:I don’t care what it looks like, but I want it fuzzy…please. OH and Only use Shedinja’s Halo Please.
Sprite with Pokemon Used or Sprite Alone:With Pokemon
Other Comments: O.o
Sorry if the shop was closed for a bit, but I’m finally finished with what the problem was and I’ll be getting back into business!
Here you go! It’s a Dark Flygon! Hope you like it!
My Notes: I noticed that in spriting, there are 16 colors for each sprite. So I decided to challenge myself and use the same amount. When finishing, I noticed I had 2 extra color slots. So I decided to make two similar (and I mean very similar) colors of the sprite. If you can find them, I congratulate you. Anyways, great sprite request Elementking990!
Fuzzy enough? Anyways, here you go! This is what I’ll call “Holy Beast of the Night” since I have no idea what to call it.
My Notes: This was interesting to play out. First had to decide on what the parts of the Pokemon I should have used. Also, the colors were difficult to figure as well, but I managed. Anyways, this was a fun sprite to do ReturnofRalin!
:o
Thanks for the recolour it looks amazing!
Here you go! It’s a Dark Flygon! Hope you like it!
My Notes: I noticed that in spriting, there are 16 colors for each sprite. So I decided to challenge myself and use the same amount. When finishing, I noticed I had 2 extra color slots. So I decided to make two similar (and I mean very similar) colors of the sprite. If you can find them, I congratulate you. Anyways, great sprite request Elementking990!
Fuzzy enough? Anyways, here you go! This is what I’ll call “Holy Beast of the Night” since I have no idea what to call it.
My Notes: This was interesting to play out. First had to decide on what the parts of the Pokemon I should have used. Also, the colors were difficult to figure as well, but I managed. Anyways, this was a fun sprite to do ReturnofRalin![/quote]
Thanks Lucario looks amazing :D -puts into Signature- Fuzzyyy
Muhahahaha time to test your skills!!!
Pokemon:Luxray,Buizel,Lucario,skitty
Color of Sprite:Luxrays colors
Description:I want you to use Lucario as the base with luxrays colors buizels tail and skitty's ears
Sprite with Pokemon Used or Sprite Alone:sprite alone
Other Comments:So are you up for the challenge?
I think I made it too simple for challenge tastes…
My Notes: The hardest part of this sprite was the ears. They were too big, so I had to shrink it, thus reducing quality. So I had to draw the ears again. Also, the Luxray colors are similar to Lucario’s, so there’s probably not much of a difference.
Here’s a bit of a break from hard sprite requests.
Pokemon: Deoxys (Any forme, or multiple, or all of them, whichever you think will turn out best.) and Beheeyem.
Color of Sprite: Be creative! Use ANY colors you want!
Description: Just take your time and try your best.
Sprite with Pokemon Used or Sprite Alone: Sprite with the Pokemon used.
Other Comments: In case I might want to use it for my Avatar, make a version without the Pokemon used shown, please.
Truthfully, no sprite is difficult. It’s just time consuming. Anyways, sprite.
My Notes: My favorite form of Deoxys is the Speed Form. It’s just a load of fun. Since you said “any” colors, I decided to use Beheeyem’s. That was a terrible decision as Beheeyem has only twelve colors, and he doesn’t have any white in his sprite. Anyways, I’m not sure if you want to use this as your avatar or not (I wouldn’t for obvious reasons as it looks like it’s wearing face-paint), so I have it alone in the spoiler below. I did what you said and relaxed. And when relaxing, I don’t try my best… Heh… Anyways, thanks for letting me relax, maraia!
It’s great! Thanks! Currently I’m debating on whether to use it as my avvie. But anyways, thanks!
Pokemon: Charizard, Typhlosion,Blaziken, Monferno, Emboar
Color of Sprite: Whatever fits.
Description: Combine all 5 fully evolved starters in any way you’d like.~
Sprite with Pokemon Used or Sprite Alone: Sprite with Pokemon used.
Other Comments: A bit of a challenge, no rush. Take however long you need.
Meh, I like Typhlosion… Too much.
My Notes: Looking at the sprites, I noticed that Blaziken had the longest legs. So I tried to put it on the stubby legged Typhlosion. Man, did he gain a lot of height. I think I’m past the height of the maximum for Black/White sprites. Meh, whatever. I also had problems with making Charizard, Emboar, and Infernape into the sprite. So I used the tail of Charizard (didn’t feel like using wings), Blaziken’s knee and shoulder plates, and the metallic strap of Emboar as a belt (too lazy to make it more belt-like).
If you want me to change it, go ahead and say so.
Meh, I like Typhlosion… Too much.
My Notes: Looking at the sprites, I noticed that Blaziken had the longest legs. So I tried to put it on the stubby legged Typhlosion. Man, did he gain a lot of height. I think I’m past the height of the maximum for Black/White sprites. Meh, whatever. I also had problems with making Charizard, Emboar, and Infernape into the sprite. So I used the tail of Charizard (didn’t feel like using wings), Blaziken’s knee and shoulder plates, and the metallic strap of Emboar as a belt (too lazy to make it more belt-like).
If you want me to change it, go ahead and say so.[/quote]
I’m just dropping by, and I’m really impressed with the rather unlimited creativity when it comes to making these sprites! Here’s something I’ve noticed with a rather decent amount of sprites which contain fire on them.
The invention of fire is something that dates back years and years ago. Not only was it used for warmth and cooking, it was also used to produce light.
The head and - I believe - tail should have a few more highlights due to the fire on its back. Maybe the front leg too? It seems oddly dark to me.
But, otherwise, the shading looks good. Happy spriting.
Ohgod I’m so late but anyways thanks for the sprite~ x3
Aaaaand I have 2 recolors. asdf.
Pokemon: Zorua
Recolor of Pokemon: All red.
Other Comments: tulips
Pokemon: Chikorita
Recolor of Pokemon: The body is purple, the leaf is EVEN MOAR purple, and can you make the leaf like it’s a bit cloudy or something? Like, misty or hazy? Also, the little buds on its neck stays the same color.
Other Comments: Red, it"s Mistrene Yeahh… Stuff
Meh, I like Typhlosion… Too much.
My Notes: Looking at the sprites, I noticed that Blaziken had the longest legs. So I tried to put it on the stubby legged Typhlosion. Man, did he gain a lot of height. I think I’m past the height of the maximum for Black/White sprites. Meh, whatever. I also had problems with making Charizard, Emboar, and Infernape into the sprite. So I used the tail of Charizard (didn’t feel like using wings), Blaziken’s knee and shoulder plates, and the metallic strap of Emboar as a belt (too lazy to make it more belt-like).
If you want me to change it, go ahead and say so.[/quote]
Wow, you did a really good job!~